How To Remove Bubbles From Resin Without Heat Gun

If yous Hate bubbles in resin (Let'south get real–who likes bubbles in resin??), then you're going to love this. I'yard showing you how to apply a heat gun with resin so information technology cures crystal-clear.

And if yous Beloved bubbles in resin, then y'all'll desire to keep reading. Because at that place are ways a heat gun can aid you make epoxy art.

And maybe think about getting therapy. Forth with those who bask sanding resin.

Why use a heat gun for resin?

Information technology's safer than a propane torch or lighter.

Because the estrus gun doesn't have a flame, it'southward harder to fix something on burn down. This is pretty of import if you use solvents like acetone and booze in your work. Both of these can brand your epoxy grab fire.

⚠️ IMPORTANT: Discover I said harder, not impossible to starting time a burn down. Accept a burn extinguisher handy anytime you're working with resin.

Heat guns produce heat with very petty air 'force.'

This ways you'll go a lot of hot air without feeling much velocity.

Yeah, I don't similar physics either, so let'southward compare this to a hairdryer.

Turn on a hairdryer and put information technology upward to your face. You'll run across your pilus flip everywhere. And if yous don't, this movie clip sums it upwardly perfectly.

Exercise that with a oestrus gun and your hair won't move. And that's what makes it ideal for resin projects. You won't blow resin all over the place like y'all would with a hairdryer.

Heat guns tin assistance make cells in resin art.

Cells are the holy grail of resin painting. Heat guns help you make resin cells because they push resin over the surface of your painting.

But before yous utilise a heat gun, there are a few safety precautions you lot demand to know.

The tip of the heat gun gets very hot.

You don't want to bear upon the metal mesh end afterward using it because you can fire yourself.

Use the kickstand on the rut gun.

Because the estrus gun end tin burn or warp a table or a surface, gear up it down on your table using the kickstand. Yous don't want to scorch your tabular array.

Exist mindful of touching the heat gun.

Just considering you have gloves on, doesn't mean the resin stays on the gloves. Wipe your hands before grabbing your heat gun. Resin from your gloves will transfer to the estrus gun and gets it pasty. And that sticky resin will exist hard to go off subsequently. Go over the surface of your heat gun with an alcohol wipe before putting it away to make sure it's make clean.

So how do yous utilise a heat gun for resin?

Step i

Keep your heat gun virtually 2 inches from the resin surface. Go over your surface in a back-and-forth or circular motion. You should see bubbles pop.

Step 2

For stubborn bubbles, yous can get a piddling closer. Move the heat gun quickly to jiggle the bubbles and get them to pop. This works well when the bubbles are in corners or tight spots.

Step three

If you're using a rut gun to make resin, utilise it to push your resin for fine art. The closer you get the gun to the surface, the more y'all will move the resin.

⭐️ BONUS: Here are the details on how to make cells in resin art. Video included!

What else should you lot know almost how to use a heat gun for resin?

The heat of the heat gun adds to the temperature of the resin.

It'southward normal for resin to become hot when mixed. This is of import to make sure it cures. But, there is too much of a good thing. A resin that gets too hot will cure too rapidly and be unusable. Keep your heat gun moving, then you lot don't apply too much heat to one spot.

A heat gun can damage molds.

Applying besides much heat to resin molds can damage them. Your resin can stick to the silicone making your molds unusable.

A oestrus gun will simply remove surface bubbling.

A heat gun is swell at getting surface resin bubbles. Just, information technology will non become ones at the bottom of your mold or spread throughout the resin. You'll have to find some other way to get those rotten scoundrels.

Don't sweat it. I've got an attack plan for those too.

⭐️ BONUS: Here are ten of my best tips for getting rid of bubbles in resin.

If you are prepare to buy a heat gun for resin, here's the one I employ:

Want more assist? Here's a video where I show you how to use a heat gun for resin.

Are you tired of making art and crafts with resin but unhappy with your mucilaginous, bubble-filled results?

Are you tired of making fine art with resin but unhappy with your sticky, bubble-filled results? I get your hurting. The same matter happened to me when I started crafting with resin. Information technology's why I wrote the beginner book, Resin Fundamentals. It's an easy-to-read ebook that details the vital points y'all need to know to make something unique with resin. Buy the book at present and become a download link to your email in minutes.

Source: https://www.resinobsession.com/resin-frequently-asked-questions/heat-gun-for-resin/