banner



How To Remove Ikea Tupplur Roller Blinds

This postal service may contain chapter links

I've been in the house almost a year now. And I but hung window treatments the other day. Whoops. Chalk it upwards to shifting priorities. Yet when the realtor came through to give me some tips on what I could to do make the firm expect more "finished" window treatments (at least blinds at the blank minimum in all of the rooms) is obviously a standard.

I'd pinned this link/tutorial some time ago, which showed how to customize a cheap roller shade. Which is exactly what I did. Except instead of fabric, I only used an erstwhile shower curtain. Here is how I did information technology.

Hullo Impact.

My Ikea Roller Shade Hack

Getting Started

After some research, I concluded up ordering the Isdans roller shade from ikea.com. With the $xv aircraft fee, it came out to $26 per shade. ($52 for both.)I ordered two 39 inch shades and cut them both to fit.

LB Annotation: The Isdans roller shade is no longer available from Ikea. Similar options are the IKEA Tupplur or IKEA Skogsklover. I as well beloved this similar Amazon option, which you can get for less than even the cheapest Ikea cost.

roller shade ikea

I then installed the hardware to the window.

installing window treatment hardware

window treatment hardware 2

Then measured again. Note: Exist sure to include the length of the niggling knob thingy on the end. On the offset window, I did it just from argent to silver of the pole and struggled for a adept hour or two trying to put information technology up.

The second time I measured from the knob to the silvery part where I wanted to make a cut and marked it. Measure twice, cut once.

measuring cuts for pipe

And so I used a PVC pipe cutter to cutting the non-knob cease to length. Here is a cracking "How to use a kobalt pvc cutter" tutorial video since they don't come with instructions…obviously. Since the ends get a little smushed during the pipe cutting, you may have to employ needle nose pliers and/or a hammer to flatten it out once again.

LB Note : Depending on the size of your window you may not even need to cut. You can just order a size that fits your window. My house is older, so the windows are of an odd size, which is why I had to cut.

PVC pipe cutter at work

Ikea Roller Shade Hack – The Fun Part

At present comes the fun part with the fabric. I laid my shower pall face up downwardly on the floor of my office.

shower curtain all laid out

Wait familiar? You may have seen the shower curtain before in the guest bathroom.

bathroom from above with text

I didn't beloved information technology in the bathroom, but I thought the light blues, yellows, and soft gray matched up perfectly with the new ice blue kitchen colour.

Notation: Earlier y'all gum brand sure your hardware is going to match up once you flip the shade to where the "front" of the fabric is. Mine was reversed, I didn't double-check, and I had to start all over after I did my offset shade and tried to hang it backward.

Tips and Tricks for Your Ain Ikea Roller Shade Hack

I searched online for the best-rated material gum. Turns out it is this Unique Stitch Adhesive ($half dozen.25 a tube on Amazon.) I was pretty impressed with the results.

Now, all you have to do is line upwardly the bottom with the seam of your shower curtain (if there is i.) Then unroll the roller shade all the way out (cutting for length if you need to-I did!) Then you glue your fabric all the fashion around, leaving an inch or so on each corner. It dries super fast, but I gave information technology near thirty minutes in betwixt drying and hanging.

glue

Then hang your shades.

window treatment before and after

I recollect information technology substantially cozies the room up. Forgive the deviation in lighting, ane ready of photos was taken in the AM and the other at night. The morning "earlier" pic on both is a truer reflection of the "blue" tone of the walls.

2nd before and after window treatment collage

Why this Is Infinitely Better than Paying For Custom Roller Shades

Custom roller shades with specialty fabric can cost anywhere from $three-500 per shade or more than (I am checking prices over again Smith+Noble, an upscale custom shade store)  and could go fifty-fifty college if you lot have any extra features and upgrades you go. Information technology should exist noted that my Ikea shades can get downwards, but if I desire to depict them up, I have to take them off the mount and manually ringlet them or roll them with my easily.

Not platonic, but for $26 total (assuming you have the supplies and the shower curtain) y'all cannot beat out the price.

I like the idea of giving the shower pall a second life, and I liked that information technology came already hemmed so information technology looked a flake more finished than just gluing nether would have.

Hope you guys enjoyed my custom window treatment hack!

Desire to DIY your own custom roller shade? Get the supplies you need here: Amazon Roller Shade, Kobalt PVC Pipe Cutter  – if applicable (Cuts up to two 1/2 inches!), Unique Sew Adhesive, Fabric Scissors. Cheers!

The TL:DR

Added 2022: This post is gracefully aging, and so there's a lot to update you on.

  • These window treatments were office of a larger renovation I did on this house. Here'southward the total post on that $58k renovation.
  • I sold the house in this mail service in 2022. Here'southward the full post on how I used these window treatments (among other things!) to increase the value of my home and sell it for a lot of money.
  • Here's a post on real estate investing for beginners.
  • I am now flipping houses. You lot can read well-nigh that here!
  • Thinking of ownership a domicile this twelvemonth? Hither's a post on condo vs. house.

Source: https://financialbestlife.com/ikea-roller-shade-hack/

0 Response to "How To Remove Ikea Tupplur Roller Blinds"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel